China Design and Manufacture Prefabricated House Light Steel Villa Prefabricated Steel Villa

Product Description

China Design and Manufacture Prefabricated House light steel villa prefabricated steel villa 

 

1.  :      Advantages
 

-- 1. Heat insulation and energy saving

Compared with the traditional wall insulation decorative building materials, it has excellent cold insulation performance. Reduce heating and cooling energy consumption to a great extent., thereby saving energy expenditure.Good quality/price.

-- 2. Easy to install and save cost
The installation of carved metal is simple, fast, is not affected by seasonal climate and geographical restrictions. Shorten the project cycle, not only to speed up the progress of the project, but also saves the cost of construction, reducing the overall cost. Metal carved plate at decoration and insulation effect at the same time, to minimize the external load of space and can enhance the utilization of land.

-- 3. light,less land,earthquake - proofed,anti-crack
Carved metal plate light weight, high strength, good impact resistance. Its light weight not only reduces the burden of the building itself, but also greatly reduces the impact of earthquakes on buildings. The plate is installed in the light steel structure building, strong integrity, anti - cracking, strong security.

-- 4. Flame retardant and water-proof
Carved metal plate after special treatment, has good flame retardant, safe. The traditional wall decoration materials, due to the existence of water through the cold caused by the degradation of the substrate, leading to indoor wall seepage and other issues. It adopts convex plug compact installation buckle slot, to avoid destroying the structure of buildings caused by the rain, snow, freezing, thawing, dry and wet cycles,Effectively avoid the indoor wall mildew phenomenon.Even in the cold region, the performance of the external wall insulation decoration integrated board will not be water seepage deformation, extended the service life of the building.

-- 5. Noise reduction and quiet and comfortable
The core material is a thermal insulation layer made of high density polyurethane foam. Its interior is an independent closed bubble structure, with good sound insulation effect. It is suitable for buildings, hospitals, schools and other buildings near the noise area, which can effectively reduce the outdoor noise into the room and keep the indoor environment quiet and comfortable

-- 6. environmental and esay to clean.
It has stable chemical and physical structure, does not decompose mildew, no radiation, no pollution, green environmental protection. The panel also can be flexibly disassembled again after installed in the use of other buildings, the construction of the remaining scrap can be recycled, greatly reduce construction waste in the construction process, Is a high quality, high performance environmentally friendly products.

-- 7. decorative and various colors can be choosed

3.  Product Details

Name	Embossed metal decorative wall sandwich panel for light steel house
Core material	Rigid high-density PU foam thermal insulation layer with fire-retardant treatment
Bottom side material	Foil protective layer with the function of insulation and moisture proof
Dimension(mm)	L3800mm*W380mm*T16mm
Thickness(mm)	16mm-20mm
Fire proof grade	A2/B1/B2
Weight(kg/m²)	3.7kg/m²
Panel Size(mm)	3000-6000mm
Packing Size(mm)	3840mm*420mm*140mm
Package quantity	8-9pcs/carton
Capacity	2000m² per day
Delivery period	10-15days
Minimum order	Concolorous 1000m² multicolor 300m²
Payment terms	T/T,L/C

4.  light gauge steel preab villa sketch map


5. Material list for steel preafb villa building

Material List For Light steel prefab villa
Main Steel Frame
Foundation	1.  Model M26 bolt; 2.  Expansion anchor bolt; 3.  Tapping screws; 4.  Standard Specification-China- standard
Steel structure frame	1. Galvanized Square tube steel and V model galvanized fastenings; 2. Steel name:square tube light steel, people called: Web steel; 3. Square tube Steel Standard Specification (40X40/60); 4. Every section frame is made up square tube with V fastenings : column,      beam of roof, beam of floor , purline, stairs, and so on ; 5. Convenience installation and shipment ;
exterior and inner wall	1.  Out panel :Metallic decoration board/ Stone painting/ Cement fiber 2.  Cold region plus XPS board(1200mmX600); 3.  Moisture proof paper(1.5mx0.5mm); 4.  Square tube(heat insulation: filling the 150mm glass wool 12kg); 5.  OSB panel(Specification 1220x2440x9/10/12/15/18mm); 6.  Gypsum board(Specification 1200X3000/2400mm,Thinkness: 9/12mm ); 7.  Interior wall use putty paint;
floor system	1.  The floor beams covered with prefabricated floor plate;                  2.  Above the floor steel plate covered with a fine steel first;        3.  Second  doused with 80~120mm cement ;                  4.  Ground of the top-level selection of ceramic tile or wood floor.       Choose ceramic tile for bathroom and kitchen;
ceiling	1.  Square tube structure(filling the 150mm glass wool 12kg);             2.  Choose Mineral Wool Board or Gypsum Board  for the living room and             bedroom, PVC Board or Aluminum ceiling for Bathroom and kitchen;
roof	1.  Square tube roof structure;  2.  12~15mm OSB panel;  3.  3mm SBS modified asphalt waterproofing membrane; 4.  Asphalt tile / Colored steel roof tile;
Door	Entrance door  is Security doors(single door or double doors) . Bedroom's door is composite door. Bathroom's door is aluminum alloy door.
Window	Windows:Plastic steel window or Bridge aluminum windows
Plumbing System and Rain Water Drainage System as per building design

6. the main frame from foundation to complete


7. Technical Parameters 

Item Name	steel structure prefab building
Main Material	light gauage steel keel and Q235/Q345 Welded H column
Surface	Hot Dip Galvanized
Roof & Wall Panel	Decorative board or gypsum board
Window	PVC Steel or Aluminum Alloy
Door	Sliding Door or Rolling Up Door
Service	Design, Fabrication and Installation
	We can make quotation according to customer's drawing or requirement;  (size by length/width/height and wind speed), offering a free design  drawing and all detailed drawings for installation.
	Design software:  Auto CAD,PKPM,MTS,3D3S, Tarch, Tekla Structures(Xsteel)V12.0.etc
Packing	According to customer's requirement
	Load into 40/20GP,40HQ or 40OT

8. Sample project



9.  Weifang Tailai steel structure Co.Ltd. one of the market leader for steel structure building business in China. more than 14year's experience .

----Weifang tailai is a professional  steel structure enterprise, including design, manufacture, and installation. 

----Weifang tailai have   employees over 180, 10 A level designer ,8 B grade designer and 20 engineer .the annual output of 100,000 tons, annual construction output 500,000 square meters.
 
----Weifang tailai has the most advanced production lines for steel structure, color steel corrugated sheet, H-section beam, C and Z-beam, roof and wall tiles, ect. 

---Weifang tailai  also have  many advances equipment like CNC Model Flame Cutting Machine, CNC Drilling Machine, Submerged Arc Welding Machine, Correcting Machine, and more.


10.  exhibition

11. RAQ

--Q1: What will client provide before we provide best quotaition ?
 
A:  When we receive inquiry from client, client  please fills purchasing intention sheet as following :
 

No.	information	description
1	Project Location
2	The total area (sqm)
3	Width *length*hight (m)
4.	How many floor
5	Wind load (speed)
6	Rain or snow load
7	Earthquake level
8	Project use propose
9	Exterior description
10	Interior description
11	Roof materials
12	Wall materials
13	Door description(position,size,type)
14	Window description(position,size,type)
15	the others

 
 
----Q2: What are main materials of steel structure house?
 
A: Our prefabricated house materials mainly include light steel structure,decorative board, roof tile, door, window, covers, screws and other accessories.
 
----Q3:  What drawing of house will factory supply?
 
A:  Plan drawing, elevation drawing, sectional drawing, foundation drawing, installation drawing.
  

12.  contact information

Company:	Weifang Tailai Steel Structure Engineering Co.,Ltd.
contact:	Debbie guo
Moblile:
Address:	No.3430 Huangshan Rd.Linqu County,  Shandong Province, P.R.China